El diseño del conector de fibra óptica MTP MPO permite el uso de una matriz y cable óptico plano que posibilita una densidad muy alta que se traduce directamente en un ahorro de costes debido a la reducción de necesidades de hardware óptico y de espacio real en nodos de telecomunicaciones y datacenters. (Un conector […]
OTDR FAQ (EXFO OTDR, JDSU OTDR, FLUKE OTDR, YOKOGAWA OTDR, ANRITSU OTDR, TARLUZ OTDR, etc This document is prepared for the newbie in fiber optic industry, to share frequently asked question (OTDR FAQ) from my customer, and shred it here. please drop message to me or post comment to me about OTDR FAQ, which will help […]
TL3224 MPO Optical Power Meter and TL3124 MPO Optical Light Source is an Optical Test Solutions especially designed for Data Center on site testing. The MPO Optical Power Meter and MPO Optical Light Source could be applied in pair to test the insertion loss for MPO/MTP Patch Cord Insertion Loss, Polarity Condition, etc. it support […]
The designs of all “high-power” SMA905 (HP905) connectors currently available are essentially the same. A metal ferrule is held tightly around the cladding of a fiber optic with a polished (or possibly cleaved) end surface. Low power SMA905 connectors have stainless steel ferrules, but since high-power SMA905 connectors are prone to overheating, many have replaced the steel with […]
TL-S7 FTTH Сварочный аппарат для оптоволокна Сварочный аппарат TL-S7 является экономичным аппаратом высокого качества, специально разработанный для высокоточного оптоволокна FTTH. Среднее значение потерь 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS), технология PAS обеспечивает точное сведение и низкие потери, технология формирования сигналов изображений CMOS. Кейс тоже выполняет функцию рабочей платформы. С надежным качеством и умной внешней формы, аппарат TL-7S […]
Data center planning has become somewhat of a specialty in the architectural world. Most architectural firms either have an RCDD (Registered Communications Distribution Designer) on staff, or acting as a consultant to assist with the specialized equipment not addressed by their Electrical Engineers and Mechanical Engineers. The equipment housed within the center is complex each with specific […]
The TIA TR-42.1.1 group was tasked with the development of the “Telecommunications Infrastructure Standard for Internet Data Centers.” “The scope of the working group included topology and performance for copper and fiber cabling, and other aspects of the IT infrastructure that will enable these facilities to rapidly deploy new technologies. Although the standard was published prior […]
Recommended cabling infrastructure deployments in the data center are based on guidance found in TIA-942 Telecommunications Infrastructure Standard for Data Centers. Using a distributed star topology in a structured cabling implementation provides the most flexible and manageable infrastructure. Many data center deployments today use the reduced topology described in TIA-942 where the horizontal distribution areas (HDAs) are […]
An EU-funded project, FABULOUS (FDMA Access By Using Low-cost Optical Network Units in Silicon Photonics), has created innovative new components to be used in digital telecommunications including digital radio, television and internet that are lower-cost and more efficient than currently existing technology. The project has demonstrated that its technology will allow higher bit rates – […]
Data requirement is tremendous increase in year 2016 to year 2020, thus a high transmission media is required, Active Optical Cables (AOCs) could achieve high data transmission over distances, The AOC with electrical inputs as a traditional copper cable, and use optical fiber as transmission media, it is an ideal to streamlined installation for high-performance […]
