The Medical fiber optics using biological compatible ETEF cladding fiber, with non-magnetic ceramic ferrule or good thermal conductivity metal ferrule, meet different application field. The auxiliary materials could meet the medical standard; the medical fiber optics could be applied to human body that meets the biomedical requirement after sterilization treatment. The fiber optics could realize […]
Narrowing down and selecting the right combination of cabling components can quickly become overwhelming, especially when you consider the hundreds of comparable components available on the market. Each component has its own advantages and disadvantages, cost variations, and compatibility levels. This is your best chance to get the right equipment purchased and deployed and to […]
Color provides quick visual identification. Color coding simplifies management and can save you hours when you need to trace cables. Color coding can be applied to ports on a patch panel: patch panels themselves come with different color jacks or have colored inserts that surround the jack. Cables are available in many colors (the color […]
With the technological evolution occurring in data centers, test requirements dramatically changed for the fiber networks that connect mission-critical servers, networking and storage devices. Selecting the proper OTDR to test your network not only strengthens its reliability, but also improves how quickly and efficiently the job is done, as well as documenting the quality of […]
The Telecommunications Industry Association’s TR-42 Engineering Committee and its subcommittees met the week of January 25, and one of the more significant results of the meeting was that the Category 8 standard—long in development within the TR-42.7 subcommittee focused on copper cabling systems—is just one step away from approval and publication. The standard is in […]
A specific lengths pre-assembled MTP/MPO Trunk cable with 12 or 24 fibers is delivered to data center for easy installation, because an It is impossible to manually to assemble MPO/MTP plug connector with 12 or 24 fibers on site during installation. The advantages of MPO/MTP Trunk cable with the following advantages • Higher Quality Higher quality […]
HOLIDAY NOTICE Our offices will be closed on Feb. 2nd, 2016, in observance of Chinese Spring Festival. We will be reopen on Feb. 15th 2016. We apologize for any inconvenience caused and thank you for your understanding. SHANGHAI TARLUZ TELECOM TECH. CO., LTD.
LC and MPO Fiber Optic connectors were defined for data center applications in accordance with ISO/IEC 24764, EN 50173-5 and TIA-942 standards for fiber optic cabling systems. MPO Connector (IEC 61754-7) MPO (multipath push-on) is based on a plastic ferrule that provides the ability to house up to 24 fibers in a single connector. Connectors […]
An OTDR sends short pulses of light into a fiber. Light scattering occurs in the fiber due to discontinuities such as connectors, splices, bends, and faults. The OTDR then detects and analyzes the backscattered signals. The signal strength is measured for specific intervals of time and is used to characterize events. The OTDR calculates distances […]
Problem Cause Solution The application displays a message indicating that a “Non-resolved fiber end” event has been found. The fiber under test is too long. Ensure that the fiber under test is shorter than the maximum length the OTDR can measure. The application displays message indicating that a “live fiber error” occurred and the fiber […]
