Q1: What are the SFP-DD and DSFP form factors? A1: The SFP-DD is short for Small Form-factor Pluggable – Double-Density and SFP-DD form-factor is defined by the SFP-DD MSA, while the DSFP is short for Dual Small Form-factor Pluggable and is defined by the DSFP MSA. They are a compact SFP-like form factor with 2x […]
Band Name Wavelengths Description O-band 1260 – 1360 nm Original band, PON upstream E-band 1360 – 1460 nm Water peak band S-band 1460 – 1530 nm PON downstream C-band 1530 – 1565 nm Lowest attenuation, original DWDM band, compatible with fiber amplifiers, CATV L-band 1565 – 1625 nm Low attenuation, expanded DWDM band U-band 1625 […]
WDM helps the network operators to run several transmission wavelengths on the same pair of optical fiber, it increases the bandwidth capacity among sites. The O-band WDM wavelengths range between 1260nm and 1360nm, compared with C-band featured with lower attenuation, and higher chromatic dispersion, it features a very low chromatic dispersion, but a higher attenuation […]
WDM technology can be divided into WDM, CWDM, and DWDM according to different wavelength modes. The wavelength range defined by ITU-T, The CWDM range is 1271 to 1611nm based on ITU-T G 684.2. Considering the fiber attenuation of the 1270-1470nm band in the application, the band of 1470~1610nm is usually used. The channel space of […]
LSF Cable (Low Smoke & Fume Cable) LSF cable is different than LSZH Cable, it is made up of a modified PVC compound and produces HCL gas and black smoke when burning, but about 80% less than PVC cable. Some points to remember about these cables are: These cables are often purchased to cut costs […]
Rule-1: When mating two MPO patch cords, it shall be an MPO male connector and an MPO female connector. Rule-2: For the standard MPO Connectors, changing the polarity, or adding or removing the guiding pins in the field is not allowed. Rule-3: MPO Female connector for direct connection to the optical module if it is […]
Multicore fiber consists of several optical fibers, which are buffered inside a single jacket. Multicore fiber can also be arranged and consolidated inside of a further jacketing. This arrangement of fiber can be referred to as space–division multiplexing since the buffered optical fibers are spatially separated while arranged within a single jacket. Applications for MCF […]
SWDM is short for Short Wavelength Division Multiplexing. it offers users an alternate solution for 40Gbps, 100Gbps, and higher connectivity over duplex multimode fiber. Some of the many advantages of SWDM are: Reach – up to 440m for 40G and 150m for 100G 40G SWDM can operate link distance up to 240, 350, and 440 […]
TARLUZ currently offers two 40G transceivers that operate over duplex multimode fiber, QSFP-40G-SWDM4, and QSFP-40G-SRBD transceivers. Both transceivers operate at multimode fiber and are widely deployed in the industry. QSFP-40G-SWDM4 and QSFP-40G-SRBD are using different technology, so they are not able to use each other. QSFP-40G-SWDM4 Transceiver TARLUZ 40G QSFP+ SWDM4 transceiver provides 40Gbps bandwidth […]
TARLUZ currently offers two 100G transceivers that operate over duplex multimode fiber, QSFP-100G-SWDM4, and QSFP-100G-SRBD transceivers. Both transceivers operate at multimode fiber reach 70m over OM3 fiber and 100m over OM4 fiber and are widely deployed in the industry. QSFP-100G-SWDM4 and QSFP-100G-SRBD are using different technology, so they are not able to use each other. […]
