1. Home
  2. Blog
  3. 400G Network
  4. Optical Interfaces of QSFP112 Optical Modules

Blog

Optical Interfaces of QSFP112 Optical Modules

The recommended location and numbering of the optical ports for 3 Media Dependent Interfaces (MDI) are shown as follows. The transmit and receive optical lanes shall occupy the positions depicted in the following when looking into the MDI receptacle with the connector keyway feature on top. QSFP112 optical MDI examples are shown for a male MPO receptacle and a dual LC.

 

Related Posts

  • Parametric Introduction for Optical Modules

    The follow parameter introduction is focused on the performance of internal components packaged inside the transceiver, mainly the transmitter optical subassembly (TOSA) and the receiver optical subassembly (ROSA). Once a client’s line arrives at the TOSA, the signal is converted from electrical to optical. Then, the TOSA sends and transmits…

  • Introduction to CFP8 Optical Modules

    The C form-factor pluggable (CFP) is a multi-source agreement to produce a common form-factor for the transmission of high-speed digital signals. The c stands for the Latin letter C used to express the number 100 (centum), since the standard was primarily developed for 100 Gigabit Ethernet systems.   CFP8 use…

  • QSFP+ Transceiver Modules Installation Guide

    Thanks for choose TARLUZ QSFP+ Transceivers, The transceivers may compatible with different network devices from different venders, TARLUZ could offer Generic and compatible QSFP+ Transceivers, CAUTION: When installing or removing a transceiver module, avoid touching the golden plating on the transceiver module with a bare hand. Do not remove the…

  • QSFP28 Transceiver Modules Installation Guide

    Thanks for choose TARLUZ QSFP28 Transceivers, The transceivers may compatible with different network devices from different venders, TARLUZ could offer Generic and compatible QSFP28 Transceivers, CAUTION: When installing or removing a transceiver module, avoid touching the golden plating on the transceiver module with a bare hand. Do not remove the…

  • CWDM8 MSA Group Releases 400G 10 km Optical Interface Specification for Data Center Optical Links

    The companies that prepared this version of the specification acknowledge the work of the IEEE 802.3 standards efforts and the CWDM4 MSA. These CWDM8 Specifications are based on much of the work the IEEE standards body has developed for 400G industry standards as well as the CWDM4 MSA. This technical…

400G Network, 800G
WhatsApp TARLUZ