The following is a comparison table among Fujikura FSM-70S+/FSM-80S+, Sumitomo Type-72C, Fitel S179A and INNO View 7 Fusion Splicers.
| Manufacturer | FUJIKURA | SUMITOMO | FITEL | INNO |
| Model No. | FSM-70S+ | TYPE-72C | S179A | View 7 |
| Splicing Method | Core Alignment | Core Alignment | Core Alignment | Core Alignment |
| Applicable Fibers | SM(G. 652/657) MM(G.651) DS(G. 653) NZDS(G. 655) |
SM(G. 652/657) MM(G.651) DS(G. 653) NZDS(G. 655) BIF |
SM (ITU-T G.652, G.657A1 and G.657A2), MM (ITU-T G.651), DSF (ITU-T G.653), Cut-off Shifted Fiber (ITU-T G.654, Large Area type), NZD (ITU-T G.655), BIF/UBIF (Bend Insensitive Fiber ITU-T G.657B3) | SM(G. 652/657) MM(G.651) DS(G. 653) NZDS(G. 655) |
| Average Loss | SM : 0.02dB MM : 0.01dB DS : 0.04dB NZ : 0.04dB |
SM : 0.02dB MM : 0.01dB DS : 0.04dB NZ : 0.04dB |
SM : 0.02dB MM : 0.01dB DS : 0.04dB NZ : 0.04dB |
SM : 0.02dB MM : 0.01dB DS : 0.04dB NZ : 0.04dB |
| Splicing Time | 6sec ULTRA FAST 7sec SM FAST, 10sec SM AUTO |
5sec(SM G652 Quick Mode), 7sec(SM G652 Std. Mode), 7sec(Auto Mode) | 6 seconds (Semi-auto mode) | 7 sec : Quick Mode 8 sec : Auto mode |
| Heating Time | 13sec FP-03,coating dia.250μm 14sec FP-03,coating dia.900μm 9sec Slim 60mm ,coating dia.250μm | 9sec (FPS-61-2.6 sleeve, S60mm 0.25 Quick Mode ) | 9 (60mm, Tyco SMOUV1120-01, coating diameter 250-900μm, Power mode) 13 (60mm, FITEL S921, coating diameter 250μm, Power mode) 15 (60mm, FITEL S921, coating diameter 900μm, Power mode) |
13 sec |
| Electrode life | 5000 arc | 6,000 arc discharges | / | 3500 arc |
| Battery Capacity |
Typical 200 Cycles (4,000 mAh) |
Approx. 300 (BU-16) | 80 Cycles with single battery 200 Cycles with two batteries |
Typical 355 Cycles (9,800 mAh) |
| Return Loss | ≥60dB | / | ≥70dB | ≥60dB |
| Fiber Holder Type |
Universal clamp (250um, 900um, loose buffer fiber) |
200 images / 10,000 splice data (internal memory only) 50,200/20,000 (with 8GB SD card) | Last 100 images to be automatically captured + up to 100 images to be stored permanently | With Universal Holder (250um, 900um, 3mm, indoor cable) |
| Splicing Programs |
Max 100 modes | Max. 300, 74 are pre-optimsed, 226 editable by user | Max. 300 | Preset 35 modes Max 128 modes |
| Heating Programs |
30 modes | Max. 100, 27 are pre-optimsed, 73 editable by user | Max. 100 | Max 32 modes |
| Tension | 1.96 ~ 2.25N | 1.96 ~ 2.09N | 1.96N | 1.96 ~ 2.25N |
| Cleaved Length |
With Sheath Clamp 5 ~ 16mm | 5 ~ 16mm, 10mm | 5 ~ 16mm | 8 ~ 16mm |
| Display | 4.73” Color LCD | 5.0″ touch screen color LCD display | 4.3” wide color LCD monitor with touch screen | 5” Touch Screen Color LCD |
| Operating Interface | / | / | GUI | GUI |
| Wireless connectivity | Wireless technical standard : Bluetooth®4.1*3 OS : Andoroid 5.0 or above, ios 8.0 or above (iphone6 above) |
Wireless LAN connectivity | Communication between splicer and smartphone | |
| Results Storage |
Splice Data : 2000 Image Data : 100 | 200 images / 10,000 splice data (internal memory only) 50,200/20,000 (with 8GB SD card) | Image Data :100 + 24 to Splice Data : 2000 be stored permanently |
Splice Data : 2000 |
| Communication Interface | USB 2.0 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for RS02 or RS03 power supply. |
USB2.0(mini-B type) SD/SDHC Memory Card |
USB ver. 2.0 mini B x 1 port, Standard A x 1 port | USB 2.0 MINI USB HDMI |
| Dimensions | 146W X 159L X150H(mm) Excluding Rubber Foot |
128(W) x 154(D) x 130(H) mm (without anti-shock rubber) | 139W x 209D x 114H mm (not including shock absorber) | 133W x 155L x 160H(mm) (excluding rubber bumper) |
| Weight | 2.5kg with ADC-18 2.7kg with BTR-09 |
1.9kg (without Battery) / 2.2kg (with Battery BU-16) | 1.7 kg (without battery), 2.0 kg (with battery) | 2.17KG (without battery) 2.80KG (with battery) |
| Power AC | 100 to 240 AC | 100 to 240 AC | 100 to 240 AC | 100 to 240 AC |
| DC | 10 to 15V with ADC-18 14.8V with BTR-09 |
10 to 15V | 11 to 24V | 9 to 14 V |
| Operating Condition |
0 to 5000m above, 0 to 95%RH and -10 to 50 °C and up to 15m/s wind velocity, respectively |
Altitude : 0 ~ 6,000m, Temperature : -10 ~ +50°C, Humidity : 0 ~ 95% (non-condensing), Wind velocity : up to 15m/sec | 0 to 5000m above, 0 to 95%RH and -10 to 50 °C and up to 15m/s wind velocity, respectively |
0 to 5000m above, 0 to 95%RH and -40 to 80 °C and up to 15m/s wind velocity, respectively |
More detailed specification please refer to :
TL-PMFS100B Specialty Fiber Fusion Splicer
PM Fusion Splicer for different kinds of Polarization-maintaining optical fiber
TL-S5 FTTH Fiber Optic Fusion Splicer
FTTH network, compct size, light weight support both SM and MM fiber, 9-second fusion splicing, 30-second heat shrinking
TL-S8 FTTH Fusion Splicer
Core to core alignment, 5-in LCD, 7200mA battery, compact size, light weight
TL-S7 FTTH Fusion Splicer
FTTH network, support both Single mode and multimode fiber, 8-second fusion splicing, 30-second heat shrinking
TYPE-81M12 Mass fusion splicer up to 12c fibers
12c ribbon splicers with 14sec. fast splicing time, Dual ovens for a faster splicing cycle, Fully navigational touch screen interface
Fujikura 70R Fusion Splicer
Fast-Mode: Finishing splicing in 11 seconds , finishing heating in 18 seconds. for both single core and ribbon fiber
S123M series Hand-Held Ribbon Fiber Fusion Splicer
Fast splice(15sec) at low loss and fast heating(36sec), 70 cycles(Splicing & heating) for S123M4 and 160 cycles for S123M8/S123M12 with two batteries
Simotomo TYPE-81C Direct Core Monitoring Fusion Splicer
Type81c Fiber Splicer, Faster 6sec. splice in Quick Mode, Reduced 14sec. heat shrink time, dual heat oven for fast splicing
Fitel Handheld S178A Core Alignment Fusion Splicer
Fast splice (7sec) at super low loss and fast heating (25sec), 200cycles (Splicing & heating) with two batteries
Fujikura FSM-80S Fusion Splicer
Automatic and fully programmable wind protector, 14-second tube heater, 200 splices/shrinks, multi-function transit case with integrated workstation
