Difference among Fujikura, Sumitomo, Fitel and INNO Fusion Splicer

The following is a comparison table among Fujikura FSM-70S/FSM-80S, Sumitomo Type-81C, Fitel S178A and INNO View 7 Fusion Splicers.

Manufacturer	FUJIKURA	SUMITOMO	FITEL	INNO
Model No.	FSM-70S	Type-81C	S178A	View 7
Splicing Method	Core Alignment	Core Alignment	Core Alignment	Core Alignment
Applicable Fibers	SM(G. 652/657) MM(G.651) DS(G. 653) NZDS(G. 655)	SM(G. 652/657) MM(G.651) DS(G. 653) NZDS(G. 655)	SM(G. 652/657) MM(G.651) DS(G. 653) NZDS(G. 655)	SM(G. 652/657) MM(G.651) DS(G. 653) NZDS(G. 655)
Average Loss	SM : 0.02dB MM : 0.01dB DS : 0.04dB NZ : 0.04dB	SM : 0.02dB MM : 0.01dB DS : 0.04dB NZ : 0.04dB	SM : 0.02dB MM : 0.01dB DS : 0.04dB NZ : 0.04dB	SM : 0.02dB MM : 0.01dB DS : 0.04dB NZ : 0.04dB
Splicing Time	10 sec : SM AUTO 7 sec : SM FAST	7 sec : Quick Mode 7.5 sec : SMF Standard Mode 8sec : Auto Mode	7 sec : Semi-Auto Mode 9 sec : Regular Mode	7 sec : Quick Mode 8 sec : Auto mode
Heating Time	14 sec	28 sec (Dual)	25 sec : Pre-heat Mode 31 sec : Regular Mode	13 sec
Electrode life	3000 arc	3000 arc	/	3500 arc
Battery Capacity	Typical 200 Cycles (4,000 mAh)	Typical 200 Cycles (4,600 mAh)	80 Cycles with single battery 200 Cycles with two batteries	Typical 355 Cycles (9,800 mAh)
Return Loss	≥60dB	/	≥60dB	≥60dB
Fiber Holder Type	Universal clamp (250um, 900um, loose buffer fiber)	/	/	With Universal Holder (250um, 900um, 3mm, indoor cable)
Splicing Programs	Max 100 modes	Max 300 modes	Max 150 modes	Preset 35 modes Max 128 modes
Heating Programs	30 modes	Max 100 modes	Max 18 modes	Max 32 modes
Tension	1.96 ~ 2.25N	1.96N (200gf)	1.96N	1.96 ~ 2.25N
Cleaved Length	With Sheath Clamp 5 ~ 16mm	5 ~ 16mm, 10mm	5 ~ 16mm	8 ~ 16mm
Display	4.73” Color LCD	4.1” Touch Color LCD	3.5” Color LCD	5” Touch Screen Color LCD
Operating Interface	/	/	/	GUI
Results Storage	Splice Data : 2000 Image Data : 100	Splice Data : 10000 Image Data : 64	Image Data :100 + 24 to Splice Data : 2000 be stored permanently	Splice Data : 2000
Communication Interface	USB 2.0	USB2.0(mini-B type) SD/SDHC Memory Card	USB 2.0	USB 2.0 MINI USB HDMI
Dimensions	146W X 159L X150H(mm) Excluding Rubber Foot	120W X 154L X130H(mm) (without anti-shock rubber)	127W X 199L X105H(mm) (not including shock absorber)	133W x 155L x 160H(mm) (excluding rubber bumper)
Weight	2.5kg with ADC-18 2.7kg with BTR-09	1.8kg (without Battery) 2.1kg with Battery	1.9kg without Battery 2.3 with two batteries	2.17KG (without battery) 2.80KG (with battery)
Power AC	100 to 240 AC	100 to 240 AC	100 to 240 AC	100 to 240 AC
DC	10 to 15V with ADC-18 14.8V with BTR-09	10 to 15V	11 to 17V	9 to 14 V
Operating Condition	0 to 5000m above, 0 to 95%RH and -10 to 50 °C and up to 15m/s wind velocity, respectively	0 to 6000m above, 0 to 95%RH and -10 to 50 °C and up to 15m/s wind velocity, respectively	0 to 5000m above, 0 to 95%RH and -10 to 50 °C and up to 15m/s wind velocity, respectively	0 to 5000m above, 0 to 95%RH and -40 to 80 °C and up to 15m/s wind velocity, respectively

More detailed specification please refer to :

Fujikura 62S active core alignment fusion splicer
Fujikura fusion splicer expand product line with the Fujikura 62S, an active core alignment splicer featuring exceptional splice loss performance and minimized splice time. With a conventional flip-open wind protector and non-motorized tube heater, the complexity of this splicer is reduced, without compromising total cycle time, says the company. Additionally,…
Fujikura 22S cladding alignment fusion splicer
AFL has introduced the Fujikura 22S active cladding alignment fusion splicer. With this model's moveable v-grooves, splicer errors due to dust and other contaminants are virtually eliminated, says the company. Removable sheath clamps allow the use of fiber holders, and the unit's large monitor provides a crystal clear image, even…
Whats the difference among Fujikura CT-30, CT-30A and CT-30B fiber cleaver
Fujikura as one of the leading supplier for fiber optic products, especially for fusion splicer and cleaver. right now many people are asking whats the difference between FSM-80S, and FSM-70S fusion splicer, whats the difference among CT-30, CT-30A, and CT-30B cleaver, this article will describe the difference among them, and…
Comparison among Fujikura CT-30, CT-30A and CT-30B Fiber Cleaver
The CT-30 Cleaver sets the standard for portability, reliability and ease of use. Available for either single fiber or ribbon splicing (up to 12 fiber ribbons) applications, the CT-30 Cleavers are compatible with all AFL fusion splicers. The improved version offers a larger base for a more stable platform, improved…
Comparison of Fujikura FSM-60S, FSM-70S and FSM-80S
Fujikura is one of the leading fusion splicing machine manufacturer over the world, they launched FSM-70S/FSM-80S, the new released unit with wind-protector from dust, moisture, and mechanical damager. Fujikura FSM-80S designed for speed, reliability and security, this Fujikura 80s replaces the previous model Fujikura – 60S. The main difference for…