The following is a comparison table among Fujikura FSM-70S/FSM-80S, Sumitomo Type-81C, Fitel S178A and INNO View 7 Fusion Splicers.
Manufacturer | FUJIKURA | SUMITOMO | FITEL | INNO |
Model No. | FSM-70S | Type-81C | S178A | View 7 |
Splicing Method | Core Alignment | Core Alignment | Core Alignment | Core Alignment |
Applicable Fibers | SM(G. 652/657) MM(G.651) DS(G. 653) NZDS(G. 655) |
SM(G. 652/657) MM(G.651) DS(G. 653) NZDS(G. 655) |
SM(G. 652/657) MM(G.651) DS(G. 653) NZDS(G. 655) |
SM(G. 652/657) MM(G.651) DS(G. 653) NZDS(G. 655) |
Average Loss | SM : 0.02dB MM : 0.01dB DS : 0.04dB NZ : 0.04dB |
SM : 0.02dB MM : 0.01dB DS : 0.04dB NZ : 0.04dB |
SM : 0.02dB MM : 0.01dB DS : 0.04dB NZ : 0.04dB |
SM : 0.02dB MM : 0.01dB DS : 0.04dB NZ : 0.04dB |
Splicing Time | 10 sec : SM AUTO 7 sec : SM FAST |
7 sec : Quick Mode 7.5 sec : SMF Standard Mode 8sec : Auto Mode |
7 sec : Semi-Auto Mode 9 sec : Regular Mode |
7 sec : Quick Mode 8 sec : Auto mode |
Heating Time | 14 sec | 28 sec (Dual) | 25 sec : Pre-heat Mode 31 sec : Regular Mode |
13 sec |
Electrode life | 3000 arc | 3000 arc | / | 3500 arc |
Battery Capacity |
Typical 200 Cycles (4,000 mAh) |
Typical 200 Cycles (4,600 mAh) |
80 Cycles with single battery 200 Cycles with two batteries |
Typical 355 Cycles (9,800 mAh) |
Return Loss | ≥60dB | / | ≥60dB | ≥60dB |
Fiber Holder Type |
Universal clamp (250um, 900um, loose buffer fiber) |
/ | / | With Universal Holder (250um, 900um, 3mm, indoor cable) |
Splicing Programs |
Max 100 modes | Max 300 modes | Max 150 modes | Preset 35 modes Max 128 modes |
Heating Programs |
30 modes | Max 100 modes | Max 18 modes | Max 32 modes |
Tension | 1.96 ~ 2.25N | 1.96N (200gf) | 1.96N | 1.96 ~ 2.25N |
Cleaved Length |
With Sheath Clamp 5 ~ 16mm | 5 ~ 16mm, 10mm | 5 ~ 16mm | 8 ~ 16mm |
Display | 4.73” Color LCD | 4.1” Touch Color LCD | 3.5” Color LCD | 5” Touch Screen Color LCD |
Operating Interface | / | / | / | GUI |
Results Storage |
Splice Data : 2000 Image Data : 100 | Splice Data : 10000 Image Data : 64 | Image Data :100 + 24 to Splice Data : 2000 be stored permanently |
Splice Data : 2000 |
Communication Interface | USB 2.0 | USB2.0(mini-B type) SD/SDHC Memory Card |
USB 2.0 | USB 2.0 MINI USB HDMI |
Dimensions | 146W X 159L X150H(mm) Excluding Rubber Foot |
120W X 154L X130H(mm) (without anti-shock rubber) |
127W X 199L X105H(mm) (not including shock absorber) |
133W x 155L x 160H(mm) (excluding rubber bumper) |
Weight | 2.5kg with ADC-18 2.7kg with BTR-09 |
1.8kg (without Battery) 2.1kg with Battery |
1.9kg without Battery 2.3 with two batteries |
2.17KG (without battery) 2.80KG (with battery) |
Power AC | 100 to 240 AC | 100 to 240 AC | 100 to 240 AC | 100 to 240 AC |
DC | 10 to 15V with ADC-18 14.8V with BTR-09 |
10 to 15V | 11 to 17V | 9 to 14 V |
Operating Condition |
0 to 5000m above, 0 to 95%RH and -10 to 50 °C and up to 15m/s wind velocity, respectively |
0 to 6000m above, 0 to 95%RH and -10 to 50 °C and up to 15m/s wind velocity, respectively |
0 to 5000m above, 0 to 95%RH and -10 to 50 °C and up to 15m/s wind velocity, respectively |
0 to 5000m above, 0 to 95%RH and -40 to 80 °C and up to 15m/s wind velocity, respectively |
More detailed specification please refer to :
TL-PMFS100B Specialty Fiber Fusion Splicer
PM Fusion Splicer for different kinds of Polarization-maintaining optical fiber
TL-S5 FTTH Fiber Optic Fusion Splicer
FTTH network, compct size, light weight support both SM and MM fiber, 9-second fusion splicing, 30-second heat shrinking
TL-S8 FTTH Fusion Splicer
Core to core alignment, 5-in LCD, 7200mA battery, compact size, light weight
TL-S7 FTTH Fusion Splicer
FTTH network, support both Single mode and multimode fiber, 8-second fusion splicing, 30-second heat shrinking
TYPE-81M12 Mass fusion splicer up to 12c fibers
12c ribbon splicers with 14sec. fast splicing time, Dual ovens for a faster splicing cycle, Fully navigational touch screen interface
Fujikura 70R Fusion Splicer
Fast-Mode: Finishing splicing in 11 seconds , finishing heating in 18 seconds. for both single core and ribbon fiber
S123M series Hand-Held Ribbon Fiber Fusion Splicer
Fast splice(15sec) at low loss and fast heating(36sec), 70 cycles(Splicing & heating) for S123M4 and 160 cycles for S123M8/S123M12 with two batteries
Simotomo TYPE-81C Direct Core Monitoring Fusion Splicer
Type81c Fiber Splicer, Faster 6sec. splice in Quick Mode, Reduced 14sec. heat shrink time, dual heat oven for fast splicing
Fitel Handheld S178A Core Alignment Fusion Splicer
Fast splice (7sec) at super low loss and fast heating (25sec), 200cycles (Splicing & heating) with two batteries
Fujikura FSM-80S Fusion Splicer
Automatic and fully programmable wind protector, 14-second tube heater, 200 splices/shrinks, multi-function transit case with integrated workstation