The 70S+ is the new standard core alignment fusion splicer covering varied splicing needs in those fields with a series of innovative features, such as automated wind protector / tube heaters, 6 seconds splicing and 9 seconds tube heating, ruggedized body, improved carrying case, wireless communication functions, etc. They are all for great splicing efficiency.
Comparison Table
Part No. | FSM-80S | FSM-70S | FSM-80S+ | FSM-70S+ |
Applicable fibres | SM (ITU-T G.652 / G.657), MM (ITU-T G.651),DS (ITU-T G.653), NZDS (ITU-T G.655) | SM (ITU-T G.652 / G.657), MM (ITU-T G.651),DS (ITU-T G.653), NZDS (ITU-T G.655) | ||
Fibre Count | Single | Single | ||
Cladding diameter | 80 to 150um | Cladding Diameter: 80um to150um | ||
Coating diameter | 100 to 3000um | 100 to 3000um | ||
Actual average splice loss | 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS | 0.02dB (SM), 0.01dB (MM), 0.04dB (DSF) and 0.04dB (NZDS) Measured by cut-back method relevant to ITU-T and IEC standards. | ||
Splice time | 7sec:SM FAST mode,
12sec :SM AUTO mode, 15sec:AUTO mode |
6sec ULTRA FAST
7sec SM FAST, 10sec SM AUTO |
||
Return loss | 60dB or greater | 60dB | ||
Splicing modes | Total 100 splice modes / 30 heating modes | Total 100 splice modes / 30 heating modes | ||
Attenuation splice function | Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an inline fixed attenuator | Intentional high splice loss of 0.1dB to 15dB(0.1dB step)can be made for an in-line fixed attenuator. | ||
Magnification | X / Y (300X magnification), or both X and Y simultaneously (160X magnification) | X / Y (320X magnification), or both X and Y simultaneously (200X magnification) | ||
Viewing method | By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor | 2 axis CMOS camera with 4.73” color LCD. | ||
Tension test | 1.96 to 2.25N | 1.96 to 2.25N | ||
Operating condition | 0-5000m above sea level, 0-95% RH and -10 to 50degC respectively | Altitude : 0 to 5,000m above sea level, Wind : 15m/sec Temperature : -10 to 50deg C, Humidity : 0 to 95%RH, non-dew | ||
Tube heat time | 13sec FP-03,coating dia.250μm 14sec FP-03,coating dia.900μm 9sec Slim 60mm ,coating dia.250μm | 13sec FP-03,coating dia.250μm 14sec FP-03,coating dia.900μm 9sec Slim 60mm ,coating dia.250μm | ||
Applicable protection sleeve length | 60mm, 40mm and a series of micro sleeves | 60mm, 40mm and a series of micro sleeves | ||
No. of splice/heating with battery | 200 times of splicing and heat shrinking under with BTR-09 | Typical 200 cycles with BTR-09 | ||
Resistance features | Shock : 76cm (30inch) all surface drop Dust : Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X Rain : H=10mm/hr for 10min, IPX2 |
Shock : 76cm (30inch) all surface drop Dust : Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X Rain : H=10mm/hr for 10min, IPX2 |
||
Wireless connectivity | / | Wireless technical standard : Bluetooth®4.1*3 OS : Andoroid 5.0 or above, ios 8.0 or above (iphone6 above) |
||
Terminals | USB 2.0 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for HJS-02 or HJS-03 power supply. | USB 2.0 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for RS02 or RS03 power supply | ||
Other features | PC software upgrade / data management | PC software upgrade / data management | ||
Dimensions | 146(W) x 159(D) x 150(H) mm | 146(W) x 159(D) x 150(H) mm |