1. Home
  2. Blog
  3. Fusion Splicing
  4. Difference among Fujikura, Sumitomo, Fitel and INNO Fusion Splicer

Blog

Difference among Fujikura, Sumitomo, Fitel and INNO Fusion Splicer

The following is a comparison table among Fujikura FSM-70S/FSM-80S, Sumitomo Type-81C, Fitel S178A and INNO View 7 Fusion Splicers.

Manufacturer FUJIKURA SUMITOMO FITEL INNO
Model No. FSM-70S Type-81C S178A View 7
Splicing Method Core Alignment Core Alignment Core Alignment Core Alignment
Applicable Fibers SM(G. 652/657)
MM(G.651)
DS(G. 653)
NZDS(G. 655)		 SM(G. 652/657)
MM(G.651)
DS(G. 653)
NZDS(G. 655)		 SM(G. 652/657)
MM(G.651)
DS(G. 653)
NZDS(G. 655)		 SM(G. 652/657)
MM(G.651)
DS(G. 653) NZDS(G. 655)
Average Loss SM : 0.02dB
MM : 0.01dB
DS : 0.04dB
NZ : 0.04dB		 SM : 0.02dB
MM : 0.01dB
DS : 0.04dB
NZ : 0.04dB		 SM : 0.02dB
MM : 0.01dB
DS : 0.04dB
NZ : 0.04dB		 SM : 0.02dB
MM : 0.01dB
DS : 0.04dB
NZ : 0.04dB
Splicing Time 10 sec : SM AUTO
7 sec : SM FAST		 7 sec : Quick Mode
7.5 sec : SMF Standard
Mode
8sec : Auto Mode		 7 sec : Semi-Auto Mode
9 sec : Regular Mode		 7 sec : Quick Mode
8 sec : Auto mode
Heating Time 14 sec 28 sec (Dual) 25 sec : Pre-heat Mode
31 sec : Regular Mode		 13 sec
Electrode life 3000 arc 3000 arc / 3500 arc
Battery
Capacity		 Typical 200 Cycles
(4,000 mAh)		 Typical 200 Cycles
(4,600 mAh)		 80 Cycles with single
battery
200 Cycles with two
batteries		 Typical 355 Cycles
(9,800 mAh)
Return Loss ≥60dB / ≥60dB ≥60dB
Fiber Holder
Type		 Universal clamp
(250um, 900um,
loose buffer fiber)		 / / With Universal Holder
(250um, 900um, 3mm, indoor cable)
Splicing
Programs		 Max 100 modes Max 300 modes Max 150 modes Preset 35 modes
Max 128 modes
Heating
Programs		 30 modes Max 100 modes Max 18 modes Max 32 modes
Tension 1.96 ~ 2.25N 1.96N (200gf) 1.96N 1.96 ~ 2.25N
Cleaved
Length		 With Sheath Clamp 5 ~ 16mm 5 ~ 16mm, 10mm 5 ~ 16mm 8 ~ 16mm
Display 4.73” Color LCD 4.1” Touch Color LCD 3.5” Color LCD 5” Touch Screen Color
LCD
Operating Interface / / / GUI
Results
Storage		 Splice Data : 2000 Image Data : 100 Splice Data : 10000 Image Data : 64 Image Data :100 + 24 to Splice Data : 2000
be stored permanently		 Splice Data : 2000
Communication Interface USB 2.0 USB2.0(mini-B type)
SD/SDHC Memory Card		 USB 2.0 USB 2.0
MINI USB
HDMI
Dimensions 146W X 159L X150H(mm)
Excluding Rubber Foot		 120W X 154L X130H(mm)
(without anti-shock
rubber)		 127W X 199L X105H(mm)
(not including shock
absorber)		 133W x 155L x 160H(mm)
(excluding rubber
bumper)
Weight 2.5kg with ADC-18
2.7kg with BTR-09		 1.8kg (without Battery)
2.1kg with Battery		 1.9kg without Battery
2.3 with two batteries		 2.17KG (without battery)
2.80KG (with battery)
Power AC 100 to 240 AC 100 to 240 AC 100 to 240 AC 100 to 240 AC
DC 10 to 15V with ADC-18
14.8V with BTR-09		 10 to 15V 11 to 17V 9 to 14 V
Operating
Condition		 0 to 5000m above,
0 to 95%RH and
-10 to 50 °C and
up to 15m/s
wind velocity,
respectively		 0 to 6000m above,
0 to 95%RH and
-10 to 50 °C and
up to 15m/s
wind velocity,
respectively		 0 to 5000m above,
0 to 95%RH and
-10 to 50 °C and
up to 15m/s
wind velocity,
respectively		 0 to 5000m above,
0 to 95%RH and
-40 to 80 °C and
up to 15m/s
wind velocity, respectively

More detailed specification please refer to :

Related Posts

  • Fujikura 62S active core alignment fusion splicer

    Fujikura fusion splicer expand product line with the Fujikura 62S, an active core alignment splicer featuring exceptional splice loss performance and minimized splice time. With a conventional flip-open wind protector and non-motorized tube heater, the complexity of this splicer is reduced, without compromising total cycle time, says the company. Additionally,…

  • Fujikura 22S cladding alignment fusion splicer

    AFL has introduced the Fujikura 22S active cladding alignment fusion splicer. With this model's moveable v-grooves, splicer errors due to dust and other contaminants are virtually eliminated, says the company. Removable sheath clamps allow the use of fiber holders, and the unit's large monitor provides a crystal clear image, even…

  • Fujikura-CT-30,-CT-30A-Fiber-Cleaver
    Whats the difference among Fujikura CT-30, CT-30A and CT-30B fiber cleaver

    Fujikura as one of the leading supplier for fiber optic products, especially for fusion splicer and cleaver. right now many people are asking whats the difference between FSM-80S, and FSM-70S fusion splicer, whats the difference among CT-30, CT-30A, and CT-30B cleaver, this article will describe the difference among them, and…

  • Comparison among Fujikura CT-30, CT-30A and CT-30B Fiber Cleaver

    The CT-30 Cleaver sets the standard for portability, reliability and ease of use. Available for either single fiber or ribbon splicing (up to 12 fiber ribbons) applications, the CT-30 Cleavers are compatible with all AFL fusion splicers. The improved version offers a larger base for a more stable platform, improved…

  • Comparison of Fujikura FSM-60S, FSM-70S and FSM-80S

    Fujikura is one of the leading fusion splicing machine manufacturer over the world, they launched FSM-70S/FSM-80S, the new released unit with wind-protector from dust, moisture, and mechanical damager. Fujikura FSM-80S designed for speed, reliability and security, this Fujikura 80s replaces the previous model Fujikura – 60S. The main difference for…

Fusion Splicing
WhatsApp TARLUZ