Fujikura as one of the leading supplier for fiber optic products, especially for fusion splicer and cleaver. right now many people are asking whats the difference between FSM-80S, and FSM-70S fusion splicer, whats the difference among CT-30, CT-30A, and CT-30B cleaver, this article will describe the difference among them, and help you to choose the right products.
Firstly lets check the component, from the following figure we can easily check that the cleaver with different plate.because CT-30 is for ribbon fiber, thus it delivered without any fiber plate, while CT-30A and CT-30B with different fiber plate.
Components of Cleaver
CT-30 | CT-30A | CT-30B | |
Instruction Manual | 1 pc | 1 pc | 1 pc |
Fiber Plate AD-30A | — | 1 pc | — |
Fiber Plate AD-30B | — | — | 1 pc |
Fiber Scrao Collector FC-02 (FSB-02 IS attached) | 1 pc | 1 pc | 1 pc |
Large Fiber Scrap Container Box FDB-03 | 1 pc | 1 pc | 1 pc |
Heagonal Wrench HEX-01 | 1 pc | 1 pc | 1 pc |
Carring Case CC-21 | 1 pc | 1 pc | 1 pc |
Side Cover SC-01 | 1 pc | 1 pc | 1 pc |
Screw N-005638 | 4 pc | 4 pc | 4 pc |
Application Fiber
Cleaver | Number of Fibers | Coated Diameter | Bare Fiber Diameter | Cleave Length |
CT-30 | Max. 12-fiber Ribbon | 125um | 10mm | |
CT-30A | 1 (single fiber) | 0.25mm | 125um | 6 to 20mm |
0.9mm | 125um | 10 to 20mm | ||
CT-30B | 1 (single fiber) | 0.25 ~ 0.9mm | 125um | 16mm |
In a summary, if you need to cleave ribbon fiber, please choose CT-30, if you wanna cleave telecom glass fiber, please choose CT-30A, if you wanna cleave special fiber, please choose CT-30B.