The designs of all “high-power” SMA905 (HP905) connectors currently available are essentially the same. A metal ferrule is held tightly around the cladding of a fiber optic with a polished (or possibly cleaved) end surface. Low power SMA905 connectors have stainless steel ferrules, but since high-power SMA905 connectors are prone to overheating, many have replaced the steel with […]
TL-S7 FTTH Сварочный аппарат для оптоволокна Сварочный аппарат TL-S7 является экономичным аппаратом высокого качества, специально разработанный для высокоточного оптоволокна FTTH. Среднее значение потерь 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS), технология PAS обеспечивает точное сведение и низкие потери, технология формирования сигналов изображений CMOS. Кейс тоже выполняет функцию рабочей платформы. С надежным качеством и умной внешней формы, аппарат TL-7S […]
Data center planning has become somewhat of a specialty in the architectural world. Most architectural firms either have an RCDD (Registered Communications Distribution Designer) on staff, or acting as a consultant to assist with the specialized equipment not addressed by their Electrical Engineers and Mechanical Engineers. The equipment housed within the center is complex each with specific […]
The TIA TR-42.1.1 group was tasked with the development of the “Telecommunications Infrastructure Standard for Internet Data Centers.” “The scope of the working group included topology and performance for copper and fiber cabling, and other aspects of the IT infrastructure that will enable these facilities to rapidly deploy new technologies. Although the standard was published prior […]
Recommended cabling infrastructure deployments in the data center are based on guidance found in TIA-942 Telecommunications Infrastructure Standard for Data Centers. Using a distributed star topology in a structured cabling implementation provides the most flexible and manageable infrastructure. Many data center deployments today use the reduced topology described in TIA-942 where the horizontal distribution areas (HDAs) are […]
An EU-funded project, FABULOUS (FDMA Access By Using Low-cost Optical Network Units in Silicon Photonics), has created innovative new components to be used in digital telecommunications including digital radio, television and internet that are lower-cost and more efficient than currently existing technology. The project has demonstrated that its technology will allow higher bit rates – […]
Data requirement is tremendous increase in year 2016 to year 2020, thus a high transmission media is required, Active Optical Cables (AOCs) could achieve high data transmission over distances, The AOC with electrical inputs as a traditional copper cable, and use optical fiber as transmission media, it is an ideal to streamlined installation for high-performance […]
ITU-T Recommend G.654 fiber is a cut-off shifted single-mode optical fiber especially used for high bandwidth long distance transmission. The G. 654 fiber is a single mode optical fiber and cable which has the zero-dispersion wavelengths around 1300nm, the fiber with loss minimized and cut-off wavelength shifted at around 1550nm. the fiber standard was firstly […]
Singapore is creating test environments to assess if data centres are able to operate at optimal levels even in hotter, tropical climates. The Infocomm Development Authority (IDA) said Monday it was working with various industry players to evaluate the feasibility of a «tropical data centre», in which environmental temperatures would be tested at up to […]
Architecture mono-fibre : Sur la partie terminale du réseau en fibre optique, une architecture monofibre est caractérisée par une fibre unique qui relie le point de mutualisation à la prise terminale optique dans un logement. Architecture multi-fibres : Sur la partie terminale du réseau en fibre optique, une architecture multifibres est caractérisée par plusieurs fibres […]
